DEWALT DWE6421K Review: Months of Weekend Sanding in a One-Car Garage
A retired electrician's notes on the 5 inch, 3.0 amp orbital sander that finally earned a shelf in a 12 by 20 garage shop.
Thirty years of sanding by hand, and the thing that finally ended it cost less than a decent block plane.
A retired electrician's notes on the 5 inch, 3.0 amp orbital sander that finally earned a shelf in a 12 by 20 garage shop.
Two 5-inch random orbital sanders, one 12 by 20 garage shop, and three weeks of running both on the same panels.
Ten reasons a random orbital sander earns its bench space in a small garage shop, and the jobs where paper still wins.
Thirty years of sanding by hand, and the thing that finally ended it cost less than a decent block plane.
Five steps, one grit at a time, and the mistakes that cost me a walnut tabletop before I learned them.
A shop-floor look at the DEWALT DWE6421K after months of cutting boards, shelves, and one cherry chest, including the dust bag and vibration issues the listing does not mention.
A year of small glue-ups, jigs and repairs with four 6-inch one-handed clamps in a 12 by 20 foot garage shop.
One is light, fast, and one-handed. The other presses harder and reaches deeper. In a 12 by 20 foot garage shop, you end up wanting both, but the order you buy them in matters.
A one-car garage shop, a glue-up that wants four hands, and the small clamps that solved it.
Two hands, four small clamps, and one frame that would not stay square.
The order of operations matters more than the clamps. A practical walk-through for a small shop, including the jobs a 6 inch mini clamp should and should not be doing.
Four 6 inch one-handed clamps, a few years on a nail over the bench, and an honest accounting of what they will hold and what they will not.
A retired electrician's honest notes on the Bosch Colt PR20EVS after years of cutting boards, end tables, and one white oak step stool in a 12 by 20 foot garage shop.
Two compact routers, one crowded bench. What the Bosch Colt does better, where the Makita RT0701C actually beats it, and how to pick for a one-car-garage shop.
A twelve by twenty foot garage shop does not have room for a router table, so the router has to earn its keep on the bench. Here is why the Bosch Colt stays on my shelf.
A 12 by 20 foot garage does not have room for tools that sit in a drawer. Notes on the palm router that stayed out.
Five steps from square corner to finished curve, using the trim router that lives on my bench and a scrap bin full of mistakes I already made for you.
A palm router is a second router, not a first one. Here is what the Bosch Colt PR20EVS does well, where the fixed base and the 1/4 inch collet hold it back, and who should walk away from it.
A retired electrician's honest accounting of the small pocket-hole jig that lives in a drawer, including the mistake that cost him a cutting board.
One jig lives in a drawer and goes to the work. The other owns a corner of the bench and holds the board for you. Here is how I would choose between them.
A garage-shop woodworker on why a drawer-sized jig keeps beating the fancier joint he never finishes.
A retired electrician argues with himself about pocket screws for three years, then buys a one pound jig and stops apologizing for his joints.
Five steps, one small jig, and the layout mistakes that cost me a Saturday on a bathroom vanity.
A 30-year hobby woodworker's honest look at the small Kreg jig: what it does well, where it frustrates, and who should spend the money on something bigger.
Three years of paring, chopping, and sharpening on a set that costs less than one premium chisel, from a 12 by 20 foot garage shop where every tool has to earn its footprint.
Two four piece chisel sets, two very different jobs. One is the set I hand to a beginner. The other is the set I keep sharp for furniture work. Here is how I decide which one comes off the rack.
Four sizes, one drawer, and a flat back that gets you into corners a router cannot reach. Notes from thirty years of hand work in a one-car garage shop.
Thirty years of woodworking, one blister-pack chisel set, and the four blades that finally made my joints look like I knew what I was doing.
The gap in your joint is usually the edge, not your layout. How to flatten, hone, and then actually use a chisel so shoulders close tight.
A year of mortises, hinge gains and end grain in a 12 by 20 foot garage shop. What the listing leaves out, where the steel gives up, and who should walk away.
A retired electrician's notes on the 5 inch, 3.0 amp orbital sander that finally earned a shelf in a 12 by 20 garage shop.
A shop-floor look at the DEWALT DWE6421K after months of cutting boards, shelves, and one cherry chest, including the dust bag and vibration issues the listing does not mention.
A year of small glue-ups, jigs and repairs with four 6-inch one-handed clamps in a 12 by 20 foot garage shop.
Four 6 inch one-handed clamps, a few years on a nail over the bench, and an honest accounting of what they will hold and what they will not.
A retired electrician's honest notes on the Bosch Colt PR20EVS after years of cutting boards, end tables, and one white oak step stool in a 12 by 20 foot garage shop.
A palm router is a second router, not a first one. Here is what the Bosch Colt PR20EVS does well, where the fixed base and the 1/4 inch collet hold it back, and who should walk away from it.
A retired electrician's honest accounting of the small pocket-hole jig that lives in a drawer, including the mistake that cost him a cutting board.
A 30-year hobby woodworker's honest look at the small Kreg jig: what it does well, where it frustrates, and who should spend the money on something bigger.
Three years of paring, chopping, and sharpening on a set that costs less than one premium chisel, from a 12 by 20 foot garage shop where every tool has to earn its footprint.
A year of mortises, hinge gains and end grain in a 12 by 20 foot garage shop. What the listing leaves out, where the steel gives up, and who should walk away.